各向异性材料的有效弹性模量

在夹杂理论的基础上,采用用自洽法导出了含分布夹杂的各向异性弹性体的本构关系和有效弹性模量的细观力学表达式。本文得到的公式不仅可以处理含缺陷和损伤的材料的有效弹性模量,而且还可处理诸于纤维复合材料等各向异性材料的理论及有效弹性模量,从而为建立材料细观结构与宏观性能之间的关系提供了理论基础。     

轮式装甲车辆的几何通过性建模与仿真

介绍了轮式装甲车辆通过障碍物的规则,分析了几何障碍物属性和通过判断条件,针对几何障碍物属性,提出了几何障碍物的通过算法,建立了几何通过性模型。采用VC＋＋编程对模型进行了仿真,通过仿真实验验证了算法和模型的可行性。     

A reusable planar triggered spark-gap switch batched-fabricated with PCB technology for medium-and low-voltage pulse power systems

Triggered spark-gap switch is a popular discharge switch for pulse power systems. Previous studies have focused on planarizing this switch using thin film techniques in order to meet the requirements of compact size in the systems. Such switches are one-shot due to electrodes being too thin to sufficiently resist spark-erosion. Additionally, these switches did not employ any structures in securing internal gas composition, resulting in inconsistent performance under harsh atmospheres. In this work, a novel planar triggered spark-gap switch (PTS) with a hermetically sealed cavity was batched-prepared with printed circuit board (PCB) technology, to achieve reusability with low cost. The proposed PTS was inspected by micro-computed tomography to ensure PCB techniques meet the requirements of machining precision. The results from electrical experiments demonstrated that PCB PTS were consistent and reusable with lifespan over 20 times. The calculated switch voltage and circuit current were consistent with those derived from real-world measurements. Finally, PCB PTS was used to introduce hexanitrostilbene (HNS) pellets in a pulse power system to verify its performance.     

Thermodynamics and performance of Al/CuO nanothermite with different storage time

The storage stability of energetic materials is important for its application. Here, the storage stability of Al/CuO nanothermite, which was prepared by electrospray method and stored with different storage time, was systematically researched. The activation energy of Al/CuO nanothermite was calculated by differential scanning calorimetry (DSC). The ignition temperature and the curve pressure history of Al/CuO nanothermite was measured using ignition temperature measuring device and constant-volume pressurization tests, respectively. Further, the thermites were characterized by X-ray Diffractometer (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM) and Transmission electron microscopy (TEM). The results show that the morphology of the thermites did not change significantly. The activation energy was decreased from 254.1 kJ/mol to 181.8 kJ/mol after storage for 13 months. When stored for 0, 7 and 13 months, the peak pressures of Al/CuO nanothermite were 685.8 kPa, 626.3 kPa and 625.5 kPa, respectively. In addition to the ignition temperature, it was 775 ℃, 739 ℃ and 754 ℃, respectively. This result indicated that the ignition and combustion properties of Al/CuO nano-thermite are obviously reduced when stored for a long time, at room temperature.     

毛细管末端凝胶推进剂液滴形成过程数值研究

要开展凝胶推进剂液滴燃烧特性的实验研究,必须首先形成凝胶推进剂液滴,在毛细管末端形成液滴是常用的液滴生成方法之一。为了揭示毛细管末端凝胶推进剂液滴的形成过程,求解了轴对称坐标系下的N-S方程,采用VOF(volume of fluid)方法捕捉液滴形成过程中气液交界面的演化规律,研究了无量纲液滴颈部直径DN/D0和无量纲液滴高度L/D0随时间的变化规律,并且与实验结果进行比较,验证了数值模型的可靠性。计算结果表明:在液滴形成过程中,液滴不是一直处于稳态;液滴颈部存在较大的剪切率,导致粘度下降,进而加快了颈部的断裂和自由液滴的形成;颈部断裂后,与液滴相连的部分迅速与液滴融合,出现很大的正向速度,而与毛细管末端相连的部分迅速收回,出现很大的负向速度。     

YFRIO 实时I/O语言与YFSIM 仿真语言的同步关系

本文介绍ＹＦＲＩＯ语言和ＹＦＳＩＭ语言的同步关系,阐述了两者同步的硬件、软件机制,以及如何进行程序设计。     

一种小型的高压毫微秒脉冲发生器及其应用

本文讨论了一种小型的高压毫微秒脉冲装置。该装置可以产生幅值120kV,上升前沿陡度大于5kV/ns、脉宽100ns 的高压脉冲,并已被用作REB 加速器的触发源、高压EMP 模拟器的脉冲源和研究介质击穿特性的能源。     

波速测量层合复合材料冲击损伤实验

在层合复合材料横向冲击试验中,用应变片记录层合板表层在冲击过程中的应变响应,根据波的传播理论和连续损伤力学,从波速变化间接测得冲击下材料的损伤及损伤率。通过实验测得玻璃纤维／环氧（ＧＥ）正交层合板的动态损伤阈值,并证实了ＧＥ复合材料在拉伸阶段比在压缩阶段有更快的损伤扩展速率     

赛船自动固定启航装置的研制

设计了一种新型赛船固定启航装置。该装置主要由浮台、尾固定器和侧固定器组成。整个系统为全飘浮式,不需要水下作业,因而可用于多种竞赛水域,可快速转移赛程。第一届世界龙舟锦标赛应用实践证明,该装置结构简单,使用方便可靠。该装置已获中华人民共和国国家专利